Cement Production Plant Design And Cost

We're here to help:
Easy ways to get the answers you need. Service Online

How to improve the production capacity of Cement Production Machines

There are many factors that affect the productivity of Cement Production Machines. The author mainly introduces the following common types and provides several tips for readers:

1. The hardness of the grinding material of the Cement Production Machine is generally less than the Mohs hardness of 9 grade brittle materials, so the hardness of the material will affect the capacity of the Cement Production Machine to a large extent. As the hardness of the material increases, the grinding difficulty of the Cement Production Machine will increase, resulting in a slower speed of the Cement Production Machine, so the capacity is reduced. Therefore, pay attention to the selection of materials when using the Cement Production Machine.

2. If the ingredients contain fine powder, it will greatly affect the productivity of the Cement Production Machine, because the fine powder contained in the material will adhere to the conveyor belt, affecting transportation and reducing production capacity. Therefore, when grinding a material with a large amount of fine powder, it is necessary to pass through the sieve once and then grind the powder, which will greatly improve the efficiency of the Cement Production Machine.

3. The fineness of the finished product is another important reason that affects the production capacity. The finer the fineness of the finished product, the lower the output. For companies that do not have special requirements on the fineness of the finished product, it is recommended that the fineness of the finished product be set to medium and fine.

4. The adhesion of the material. When the adhesion of the material is greater, the adhesion to the inner cavity of the Cement Production Machine will be stronger. If the cleaning is not timely, the output of the Cement Production Machine will be greatly affected, which will seriously cause the movement. The crusher does not work properly. Therefore, when selecting materials, try to choose materials with low adhesion.

5. The moisture content of the material will affect its adhesion. When the moisture content of the material is large, its adhesion is also greater, which will not only adhere to the inner cavity of the Cement Production Machine, but also block the transportation of the blank, resulting in productivity. decline. Therefore, when selecting materials, pay attention to the water content; when the water content is large, it can be air-dried and then milled.

Send A Message

You can get the price list and a SBM representative will contact you within one business day.