Cement Clinker Grinding Machine Cost

We're here to help:
Easy ways to get the answers you need. Service Online

Talking about the related problems of Cement Clinker Grinding Machine in powder discharging

             

Throughout the history of Cement Clinker Grinding Machine and its development, it can be concluded that the excellent grinding machine will encounter problems that need to be solved during the working process. This is an inevitable development rule of the development of mechanical equipment. For example, the Cement Clinker Grinding Machine does not produce powder. Or the problem of low powder output and low or too fine powder, then SBM Research Center has developed a feasible solution based on years of experience, because different suppliers produce it. The Cement Clinker Grinding Machine is different in details, so this solution is for reference only!

Cement Clinker Grinding Machine does not produce powder or powder, low output

cause of issue:

1. The powder locker of the Cement Clinker Grinding Machine is not adjusted well, and the sealing is not strict, causing the powder to suck up.

2, the Cement Clinker Grinding Machine blade wears a lot, the material can not be shovel.

3. The air duct of the Cement Clinker Grinding Machine is blocked.

4. The pipeline of the Cement Clinker Grinding Machine is not well sealed.

Solution:

1. Check and adjust the seal of the locker and find that the leak should be sealed.

2. Replace the new blade.

3. After the airway material is cleaned, the material is re-cut.

4. Reseal the pipe.

The finished powder of the Cement Clinker Grinding Machine is too thick or too fine.

cause of issue:

1. The analysis machine blade of the Cement Clinker Grinding Machine is seriously worn and does not function as a grade.

2. The air volume of the Cement Clinker Grinding Machine is not suitable.

Solution:

1. Replace the blade and properly close the air volume of the small fan to solve the problem of excessive powder.

2. If the powder is too fine, the inlet air volume should be increased and the rotation speed of the mill should be reduced.

Send A Message

You can get the price list and a SBM representative will contact you within one business day.